Skip to main content

Meadow.CLI

Meadow.CLI command-line interface running in a terminal window.

The Meadow Command-Line-Interface (Meadow.CLI) provides a way to interact with the board and perform functions via a terminal/command-line window.

The Meadow.CLI tool supports deployment workflows as well as device and file management including file transfers, and MCU reset.

In addition to being able to be used from a terminal window, the Meadow.CLI.Core library can also be used programmatically, within a .NET application. In fact, the IDE extensions use that directly. You can find the source here.

Some Meadow.CLI commands registering for a Wilderness Labs Account.

Installation and Updating​

Install .NET SDK​

Download and install the latest .NET SDK.

Install or update Meadow CLI​

Install the Meadow.CLI using the dotnet tool command. From a terminal, install the Meadow.CLI from the NuGet package.

dotnet tool install WildernessLabs.Meadow.CLI --global

To update to the latest version, change the install keyword to update.

dotnet tool update WildernessLabs.Meadow.CLI --global

Executing Commands​

Once installed, Meadow.CLI is accessible from a terminal prompt via the meadow command, and command arguments are passed via a fluent syntax, for instance, the following command will download the latest Meadow.OS:

meadow firmware download

Enumerating Commands & Help​

This guide covers a few of the most common commands, but there are many more to explore. For a complete list of commands, execute the following from a terminal window:

meadow --help

Additionally, you can get additional help information for any given command by passing --help (or -h shortened) as an option to that command. For instance, the following will provide guidance on the listen command:

meadow listen --help

Working with Ports​

When a Meadow device is hooked up to a host computer, it communicates via a serial port (e.g. COM3 on Windows or UART3 on macOS/Linux) over USB. If you only have one Meadow device plugged in, Meadow.CLI will attempt to locate the port and send commands via that. However, if you have multiple devices, you may need to manually specify the port.

To list serial ports, execute the following:

meadow port list

You can then specify which port to use with the meadow config route command. , replacing {port} with the port you found above.

meadow config route {port}

You only need to configure the desired port once; all subsequent commands will remember the specified port.

Common Tasks​

Download the Latest Meadow.OS and Flash to the Device​

To download the latest Meadow.OS, execute the following:

meadow firmware download

Once it's downloaded, it can be deployed to the device by executing the following:

meadow firmware write

Deploy a Meadow App​

To deploy an app to the device, execute the following, replacing {path} with the path to your app's built App.dll file:

meadow app deploy -f {path}/App.dll

Working with Files​

Listing Files on the Device​

To get a list of all the files on the device, execute the following:

meadow file list

Writing a File to the Device​

To write a file, or files, to the device execute the following, replacing [Filename] with the full path of the file to write:

meadow file write -f [Filename]

Multiple files can be specified with multiple -f parameters:

meadow file write -f [Filename1] -f [Filename2]

Delete a File from the Device​

Files can also be deleted:

meadow file delete -f [Filename]

As with file uploading, multiple files can be specified with multiple -f parameters:

meadow file delete -f [Filename1] -f [Filename2]

All of the files on the file system can be deleted without reformatting the flash:

meadow file delete all

Get Meadow's device information​

To get information about the device, including OS version, execute the following:

meadow device info

List of Commands​

Working with Apps​

  • meadow app build - Compile a Meadow application
  • meadow app debug - Debug a running application
  • meadow app deploy - Deploy a built Meadow application to a target device
  • meadow app run - Builds, trims and deploys a Meadow application to a target device
  • meadow app trim - Runs an already-compiled Meadow application through reference trimming

Meadow.Cloud commands​

  • meadow cloud apikey create - Create a Meadow.Cloud API key
  • meadow cloud apikey delete - Delete a Meadow.Cloud API key
  • meadow cloud apikey list - List your Meadow.Cloud API keys
  • meadow cloud apikey update - Update a Meadow.Cloud API key
  • meadow cloud collection list - List Meadow Collections
  • meadow cloud command publish - Publish a command to Meadow devices via Meadow.Cloud
  • meadow cloud login - Log in to Meadow.Cloud
  • meadow cloud logout - Log out of Meadow.Cloud
  • meadow cloud package create - Create a Meadow Package (MPAK)
  • meadow cloud package list - Lists all Meadow Packages (MPAK)
  • meadow cloud package publish - Publishes a Meadow Package (MPAK)
  • meadow cloud package upload - Upload a Meadow Package (MPAK) to Meadow.Cloud

Device commands​

  • meadow device clock - Gets or sets the device clock (in UTC time)
  • meadow device info - Get the device info
  • meadow device provision - Registers and prepares connected device for use with Meadow Cloud
  • meadow device reset - Resets the device

File commands​

  • meadow file delete - Deletes a file from the device
  • meadow file initial - Display the initial bytes from a device file
  • meadow file list - Lists the files in the current device directory
  • meadow file read - Reads a file from the device and writes it to the local file system
  • meadow file write - Writes one or more files to the device from the local file system

Firmware commands​

  • meadow firmware default - Sets the current default firmware package
  • meadow firmware delete - Delete a local firmware package
  • meadow firmware download - Download a firmware package
  • meadow firmware list - List locally available firmware
  • meadow firmware write - Writes firmware files to a connected meadow device

Runtime Commands​

  • meadow runtime disable - Sets the runtime to NOT run on the Meadow board then resets it
  • meadow runtime enable - Sets the runtime to run on the Meadow board then resets it
  • meadow runtime state - Gets the device's current runtime state

Additional Commands​

  • meadow config - Read or modify the meadow CLI configuration
  • meadow developer - Sets a specified developer parameter on the Meadow
  • meadow dfu install - Deploys a built Meadow application to a target device
  • meadow flash erase - Erase the contents of the device flash storage
  • meadow listen - Listen for console output from Meadow
  • meadow trace disable - Disable trace logging on the Meadow
  • meadow trace enable - Enable trace logging on the Meadow
  • meadow trace level - Sets the trace logging level on the Meadow
  • meadow uart trace disable - Disables trace log output to UART
  • meadow uart trace enable - Enables trace log output to UART

Support​

Having trouble using Meadow.CLI?

  • File an issue with a repro case to investigate, and/or
  • Join our public Slack, where we have an awesome community helping, sharing and building amazing things using Meadow.